Exam Number/Code: 642-902
Exam name: Implementing Cisco IP Routing (ROUTE)
We provide 100% pass guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.
How do we maintain 100% Guarantee on Products?
We
at CramBible are committed to our customer's success. Our products are
created with utmost care and professionalism. We utilize the experience
and knowledge of a team of industry professionals from leading
organizations all over the world.
'Success of our customers is our success'
We
understand that your time is precious and our products are intended to
help utilize it in an efficient way. Senior IT professionals craft the
products with great efforts. We strive towards continuous improvement of
our products and service. Customers are really happy with our products but
if one of our customers does not succeed in an exam we fully accommodate
at Single E-mail notification. Additionally we review that product
instantly.
Failing an Exam won't damage you financially as we provide 100% claim for your payment. On request we can provide refund. Think again! What do you have to lose?
Moneyback guarantee:
Simple and Easy! To take
advantage of the guarantee, simply contact Customer Support, requesting
the exam you would like to claim. Send us a scanned copy of your failed
exam and we will promptly proceed to Refund.
CramBible.com Guarantee insures your Success Otherwise Get Moneyback!
3CB is your source for the IT Exam 642-902 exam. With our 642-902 Exam Resources, you can be rest assured that you will Pass your 642-902 Exam on Your First Try. Our Exams are written and formatted by Top senior IT Professionals working in today is prospering companies and data centers. All of our practice exams including the 642-902 exam guarantee you success on your First Try. 642-902 is a challenging exam,with our 642-902 study guide,you can feel safe with our question and answer that will help you in obtaining your successful completion of your 642-902 exam.
642-902 In Summary:
1) There are basically six steps that you should follow to earn your way to certification, namely:
2) Decide which certification is right for you - Get a certification overview
3) Gain hands-on experience with products - View requirements for specific certifications
4) Expand your experience with training -Make use of training materials. There are excellent PDF format materials available from 3cb.com, prepared by experts on their staff.
5) Know what to expect on exams - Review a good study guide.
6) Take your required exam - You can register at either Prometric or Pearson VUE test centers.
7) Free Update for 90-days.
Commitment to this Success:
At this we are committed to you ongoing success. this exams and questions are constantly being updated and compared to industry standards.
Will I pass using your Q & A Product?
Yes crambible
Question and Answers Product is enough to pass the Exam. We recommend a 7
day study time for the candidates for any up-coming Exams.it will help you in
evaluating your preparation before Actual Exam.
How to download Products?
Products can be downloaded
very easily from the Member's Account after logging in. Click on the Order Code or "view" button
and begin download.
What is the format of your products?
Adobe Acrobat PDF files.The guides you download are in rar format originally. rar files are "archives" used for distributing and storing files. So you need an winrar tool 3.0 plus version to extract PDF files from the rar files first before being able to read the PDF guides with Acrobat Reader.
Forget Password?
Please visit Password Recovery.
We'll send you an e-mail message containing new password.
How can I get Discount?
We have combined multiple exam
products for maximum savings; Value Packs are a good way of getting
Discounted Products. However, if you are purchasing 3 or more mixed
products in a single invoice e-mail sales@3cb.com and they will
provide you with a special Discount Price.
What if I fail?
Don't worry about failing; you're
protected by Exam refund guarantee. crambible preparation materials
ensure your success. But if by any undue situation you fail to pass the
corresponding Exam you can claim for refund Guarantee. Click Here
for more details.
What
if I need assistance?
You can always contact Customer Support
or a member of our sales team using either of the following email
contacts:
web@3cb.com
Sales@3cb.com
1. Select Product & Add to Cart
Through "Search" or "Product" to find the subject which you needed, click the button "Add to cart", and add the Q&A to the cart.
2. Login to CramBible
Click "Sing up" on top left corner on website page, becomes the formal member of this website. (the registered users, can click the "login" directly, and then load the website.)
3. Payment
Payment with CramBible is safe, brisk and easy. CramBible provides a secure method of accepting Credit or Debit card Payments through a number of choices such as Visa, MasterCard, and American Express. 2CheckOut, PayPal, Western Union also available.
4. Download
Once the Payment is confirmed, you can access the products instantly in your login.
Enjoy free product and exam updates for the life of your subscription.
jim at May-27th 2010
Thanks a lot for the preparation material. It was worth the investment. I got my return as soon as I wrote my exam. The easiest 642-902 in history I bet.
nguyen duy at March-3rd 2010
thankyou very much. Thankzzzzzzz
Larry at December-16th 2009
I am thankful to your great Cisco team, who made it possible for me to acquire a CCNP 642
This webdemo is just a demo data, only for reference and learning, there is no other purposes.
QUESTION NO: 1 CORRECT TEXT ((EIGRP OSPF Redistribution Sim) In this question you need to redistribute between OSPF and EIGRP such that 172.16.100.1 is reachable from router R1. R2 is an ASBR for EIGRP 100 and OSPF AREA 24 R3 is an ASBR for EIGRP 100 and OSPF AREA 34 Note: There are TWO separate areas on TWO separate ASBRS thus you need to doredistribution on R2 and R3 R1 is ONLY in EIGRP 100, and is THE ONLY router you can ping from. R4 has a loopback interface that must be pinged from R1. R4 is running OSPF and has redundant links to EIGRP network over R3 router. Note: You should ping from R1 to 172.16.100.1 network to make sure everything is workingcorrectly. Answer: First we need to find out 5 K-Values used for EIGRP (Bandwidth, Delay, Reliability, Load, MTU) of the s0/0/0 interface (the interface of R2 connected to R4) for redistribution : R2#show interface s0/0/0 Write down these 5 parameters, notice that we have to divide the Delay by 10 because its metric unit is tens of microsecond. For example, we get Bandwidth=1544 Kbit, Delay=20000 us, Reliability=255, Load=1, MTU=1500 bytes then we would redistribute as follows: R2#config terminal R2(config)#router ospf 1 R2(config-router)# redistribute eigrp 100 metric-type 1 subnets R2(config-router)#exit R2(config-router)#router eigrp 100 R2(config-router)#redistribute ospf 1 metric 1544 2000 255 1 1500 (Notice: In fact, these parameters are just used for reference and we can use other parameters with no problem. Also, a candidate said that the simulator didn¡¯t accept the Bandwidth of 1544; in that case, we can use a lower value, like 128.) If the delay is 20000us then we need to divide it by 10, that is 20000 / 10 = 2000) For R3 we use the show interface fa0/0 to get 5 parameters too R3#show interface fa0/0 For example we get Bandwidth=10000 Kbit, Delay=1000 us, Reliability=255, Load=1, MTU=1500 bytes R3#config terminal R3(config)#router ospf 1 R3(config-router)#redistribute eigrp 100 metric-type 1 subnets R3(config)#exit R3(config-router)#router eigrp 100 R3(config-router)#redistribute ospf 1 metric 10000 100 255 1 1500 QUESTION NO: 2 CORRECT TEXT (Policy Based Routing Sim) Company Acan has two links which can take it to the Internet. The company policy demands that you use web traffic to be forwarded only to Frame Relay link and other traffic can go through any links that are available. Use BGP attributes to solve the requested action. Answer: 1) Create an Access list that catches the HTTP traffic: BorderRouter#access-list 101 permit tcp any any eq www Note that the server was not directly connected to the Border Router. There were a lot of EIGRP routes on it. In the real exam you do not know the exact IP address of the server in the EIGRP network so we have to use the source as ¡°any¡± to catch all the source addresses. 2) Route map that sets the next hop address to be ISP1 and permits the rest of the traffic: BorderRouter(config)#route-map pbr permit 10 BorderRouter(config-route-map)#match ip address 101 BorderRouter(config-route-map)#set ip next-hop 10.1.101.1 BorderRouter(config-route-map)#exit BorderRouter(config)#route-map pbr permit 20 (Notice: the route-map pbr permit 20 line allows other traffic than HTTP to be routed. Otherwise, other traffic will be dropped) 3) Apply the route-map on the interface to the server in the EIGRP Network: BorderRouter(config-route-map)#exit BorderRouter(config)#int fa0/0 BorderRouter(config-if)#ip policy route-map pbr BorderRouter(config-if)#exit BorderRouter(config)#exit 4) There is a ¡°Host for Testing¡±, click on this host to open a box in which there is a button named ¡°Generate HTTP traffic¡±. Click on this button to generate some packets for HTTP traffic. Jump back to the BorderRouter and type the command ¡°show route-map¡±. BorderRouter#show route-map In the output you will see the line ¡°Policy routing matches: 9 packets¡¡±. It means that the route-map we configured is working properly. QUESTION NO: 3 CORRECT TEXT ( EIGRP Stub Sim ) By increasing the first distant office, JS manufactures has extended their business. They configured the remote office router (R3) from which they can reach all Corporate subnets. In order to raise network stableness and lower the memory usage and CPU utilization to R3, JS manufactures makes use of route summarization together with the EIGRP Stub Routing feature. Another network engineer is responsible for the implementing of this solution. However, in the process of configuring EIGRP stub routing connectivity with the remote network devices off of R3 has been missing. Presently JS has configured EIGRP on all routers in the network R2, R3, and R4. Your duty is to find and solve the connectivity failure problem with the remote office router R3. You should then configure route summarization only to the distant office router R3 to complete the task after the problem has been solved. The success of pings from R4 to the R3 LAN interface proves that the fault has been corrected and the R3 IP routing table only contains two 10.0.0.0 subnets. Answer: First we have to figure out why R3 and R4 can not communicate with each other. Use the show runningconfig command on router R3 Notice that R3 is configured as a stub receive-only router. The receive-only keyword will restrict the router from sharing any of its routes with any other router in that EIGRP autonomous system. This keyword will also prevent any type of route from being sent. Therefore we will remove this command and replace it with the eigrp stub command: R3#configure terminal R3(config)#router eigrp 123 R3(config-router)#no eigrp stub receive-only R3(config-router)#eigrp stub R3(config-router)#end Now R3 will send updates containing its connected and summary routes to other routers. Notice that the eigrp stub command equals to the eigrp stub connected summary because the connected and summary options are enabled by default. Next we will configure router R3 so that it has only 2 subnets of 10.0.0.0 network. Use the show ip route command on R3 to view its routing table R3#show ip route Because we want the routing table of R3 only have 2 subnets so we have to summary sub?networks at the interface which is connected with R3, the s0/0 interface of R4. There is one interesting thing about the output of the show ip route shown above: the 10.2.3.0 /24, which is a directly connected network of R3. We can't get rid of it in the routing table no matter what technique we use to summary the networks. Therefore, to make the routing table of R3 has only 2 subnets we have to summarize the other subnets into one subnet. In conclusion, we will use the ip summary-address eigrp 123 10.0.0.0 255.0.0.0 at the interface s0/0 of R4 to summary. R4>enable R4#configure terminal R4(config)#interface s0/0 R4(config-if)#ip summary-address eigrp 123 10.0.0.0 255.0.0.0 Now we jump back to R3 and use the show ip route command to verify the effect, the output is shown below: (But please notice that the ip addresses and the subnet masks in your real exam might be different so you might use different ones to solve this question) Just for your information, notice that if you use another network than 10.0.0.0/8 to summary, for example, if you use the command ip summary-address eigrp 123 10.2.0.0 255.255.0.0 you will leave a /16 network in the output of the show ip route command. But in your real exam, if you don't see the line "10.0.0.0/8 is a summary,....Null0" then you can summary using the network 10.2.0.0/16. This summarization is better because all the pings can work well. Finally don't forget to use the copy running-config startup-config command on routers R3 and R4 to save the configurations. R4(config-if)#end R4#copy running-config startup-config QUESTION NO: 4 CORRECT TEXT (OSPF Sim) OSPF is configured on routers Amani and Lynaic. Amani's S0/0 interface and Lynaic's S0/1 interface are in Area 0. Lynaic's Loopback0 interface is in Area 2. Your task is to configure the following: Portland's S0/0 interface in Area 1 Amani's S0/1 interface in Area 1 Use the appropriate mask such that ONLY Portland's S0/0 and Amnani's S0/1 could be in Area 1. Area 1 should not receive any external or inter-area routes (except the default route). Answer: First, we configure Portland's S0/0 interface so that it belongs to Area 1. So, we have tofind out which subnetwork the IP address 192.168.4.5/30 (the IP of interface S0/0 of Portland)belongs to. This address belongs to a subnetwork which has:Increment:4 (/30 = 255.255.255.252 or 1111 1111.1111 1111.1111 1111.1111 1100)Network address:192.168.4.4 (because 4 = 4 * 1 and 4 < 5)Broadcast address:192.168.4.7 (because 7 = 4 + 4 - 1) (It is not necessary to find out thebroadcast address but we should know it) The question requires that only Portland's S0/0 and Amani's S0/1 could be in Area 1, therefore we must use a wildcard of 0.0.0.3 (this wildcard is equivalent with a subnet mask of /30) so that there are only 2 IP addresses can participate in area 1 (they are 192.168.4.5 & 192.168.4.6). The full command we use here isnetwork 192.168.4.4 0.0.0.3 area 1The question also requires that "Area 1 should not receive any external or inter-area routes (except the default route)". Recall that if we don't want the router to receive external routes, we have to stop LSA Type 5. And if we don't want to receive inter-area routes, we have to stop LSA Type 3 and Type 4. Therefore we have to configure area 1 as a totally stubby area. For your information, here is the definition of a totally stubby area: "Totally stubb area - This area does not accept summary LSAs from other areas (types 3 or 4) or external summary LSAs (Type 5). Types 3,4 and 5 LSAs are replaced by the Area Border Router(ABR) with a default router. Totally stubby areas protect internal routers by minimizing the routing table and summarizing everything outside the area with a default route." (CCNP BSCI Official Exam Certification Guide, Fourth Edition) In conclusion, we have to configure area 1 as a totally stubby area. We do that by configuring Portland as stub and configuring Amani (ABR router) as a stub + "no-summary"suffix. + Configure Portland router as a stub: Portland#configureterminal Portland(config)#router ospf 1 Allow network 192.168.4.4/30 to join Area 1, notice that you have to convert subnet mask into wildcard mask: Portland(config-router)#network 192.168.4.4 0.0.0.3 area 1 Configure Portland as a stub: Portland(config-router)#area 1 stub Portland(config-router)#end Portland#copyrunning-config startup-config + Configure Amani router as a "totally stub": Amani#configureterminal Amani(config)#router ospf 1 Amani(config-router)#network 192.168.4.4 0.0.0.3 area 1 Make area 1 become a totally stubby area, notice that we can only use this command on ABR router: Amani(config-router)#area 1 stub no-summary Amani(config-router)#end Amani#copyrunning-config startup-config QUESTION NO: 5 CORRECT TEXT Acme is a small export company that has an existing enterprise network that is running IPv6 OSPFv3. Currently OSPF is configured on all routers. However, R4's loopback address (FEC0:4:4) cannot be seen in R1's IPv6 routing table. You are tasked with identifying the cause of this fault and implementing the needed corrective actions that uses OSPF features and does no change the current area assignments. You will know that you have corrected the fault when R4's loopback address (FEC0:4:4) can ping from R1 to R4 loopback address. Answer: To troubleshoot the problem, first issue theshow running-configon all of 4 routers. Pay more attention to the outputs of routers R2 and R3 The output of the "show running-config" command of R2: The output of the "show running-config" command of R3: We knew that all areas in an Open Shortest Path First (OSPF) autonomous system must be physically connected to the backbone area (Area 0). In some cases, where this is not possible, we can use a virtual link to connect to the backbone through a non-backbone area. The area through which you configure the virtual link is known as a transit area. In this case, the area 11 will become the transit area. Therefore, routers R2 and R3 must be configured with thearea virtual-linkcommand. + Configure virtual link on R2 (from the first output above, we learned that the OSPF process ID of R2 is 1): R2>enable R2#configure terminal R2(config)#ipv6 router ospf 1 R2(config-rtr)#area 11 virtual-link 3.3.3.3 Save the configuration: R2(config-rtr)#end R2#copy running-config startup-config (Notice that we have to use neighbor router-id 3.3.3.3, not R2's router-id 2.2.2.2) + Configure virtual link on R3 (from the second output above, we learned that the OSPF process ID of R3 is 1 and we have to disable the wrong configuration of "area 54 virtual-link 4.4.4.4"): R3>enable R3#configure terminal R3(config)#ipv6 router ospf 1 R3(config-rtr)#no area 54 virtual-link 4.4.4.4 R3(config-rtr)#area 11 virtual-link 2.2.2.2 Save the configuration: R3(config-rtr)#end R3#copy running-config startup-config You should check the configuration of R4, too. R4(config)#ipv6 router ospf 1 R4(config-router)#no area 54 virtual-link 3.3.3.3 R4(config-router)#end After finishing the configuration doesn¡¯t forget to ping between R1 and R4 to make sure they work well! Note: If you want to check the routing information, use the show ipv6 route command, not "show ip route". Topic 2, OSPF Hotspot QUESTION NO: 6 The company and the company network have both been growing rapidly. Multiple adds, moves and changes have been applied to the network. Your boss has asked you to troubleshoot a recent OSPF synchronization problem that has arisen. There have been synchronization problems at separate locations in the OSPF area 0. There have been reported link failures during the rapid growth of the company network. You are required to resolve the OSPF problem. OSPF must be able to converge when the network changes. Refer to the information above to answer the following question Examine the following excerpt from the ¡°show ip ospf¡± command on D1: Area BACKBONE (0) Number of interfaces in the this area is 1 Area has no authentication SPF algorithm last executed 00:00:31.280 ago SPF algorithm executed 5 times Area ranges are Number of LSA 13. Checksum Sum 0x16F0FD Number of opaque link LSA 0. Checksum Sum 0¡Á000000 Number of DCbitless LSA 0 Number of indication LSA 0 Number of DoNotAge LSA 0 Flood list length 0 Area 16 Number of interfaces in this area is 2 Area has message digest authentication SPF algorithm last executed 00:00:34.928 ago SPF algorithm executed 7 times Area ranges are Number of LSA 5. Checksum Sum 0x02FCD3 Number of opaque link LSA 0. Checksum Sum 0¡Á000000 Number of DCbitless LSA 0 Number of indication LSA 0 Number of DoNotAge LSA 0 Flood list length 0 Based on the information shown above, what is most likely causing the different missing routes throughout the network? A. Area 16 is configured with authentication. B. Area 16 has been configured to use the same interfaces as Area 0. C. Area 0 and Area 32 have been configured with mismatched LSA numbers. D. Area 16 has been configured as a total stub network E. Area 16 has been configured as a stub network F. Area 0 is discontiguous. G. None of the above Answer: F From the topology, we see D1 has 2 interfaces belong to Area 0, that are interfaces Fa0/1 & Fa0/2 but the output says there is only one interface in Area 0 (Number of interfaces in the this area is 1). Therefore we can deduce that a link in area 0 was down and area 0 is dis contiguous. QUESTION NO: 7 The company and the company network have both been growing rapidly. Multiple adds, moves and changes have been applied to the network. Your boss has asked you to troubleshoot a recent OSPF synchronization problem that has arisen. There have been synchronization problems at separate locations in the OSPF area 0. There have been reported link failures during the rapid growth of the company network. You are required to resolve the OSPF problem. OSPF must be able to converge when the network changes. Refer to the information above to answer the following question. Which configuration command on D1 (with a similar command on D2) will provide an immediate solution to the missing route problem? A. no area 16 stub B. no area 16 authentication message-digest C. area 16 virtual-link 8.187.175.82 D. area 16 virtual-link 172.16.4.2 E. no area 16 stub no-summary F. network 172.16.0.0.0.0.255.255 area 16 G. None of the above Answer: C QUESTION NO: 8 The company and the company network have both been growing rapidly. Multiple adds, moves and changes have been applied to the network. Your boss has asked you to troubleshoot a recent OSPF synchronization problem that has arisen. There have been synchronization problems at separate locations in the OSPF area 0. There have been reported link failures during the rapid growth of the company network. You are required to resolve the OSPF problem. OSPF must be able to converge when the network changes. Refer to the information above to answer the following question. The log of d1 reports the following: This event was anticipated due to maintenance; however, it resulted in excessive lost routes. Which route should be the only one removed from the routing tables of the routers? A. 8.187.175.82/32 B. 10.138.43.0/30 C. 10.206.180.0/30 D. 4.249.113.59/32 E. 10.201.0.0/30 F. None of the above Answer: E From the log we learn that the link of Interface Fa0/1 has been down. This link belongs to network 10.201.0.0/30 so we just need to remove this route from the routing table. QUESTION NO: 9 The company and the company network have both been growing rapidly. Multiple adds, moves and changes have been applied to the network. Your boss has asked you to troubleshoot a recent OSPF synchronization problem that has arisen. There have been synchronization problems at separate locations in the OSPF area 0. There have been reported link failures during the rapid growth of the company network. You are required to resolve the OSPF problem. OSPF must be able to converge when the network changes. Refer to the information above to answer the following question. The R2 router has lost connectivity to R1. The following is R1s current route table: Which expected route is missing from R1s route table based on the topology during the maintenance period?¡¯ A. o 172.16.0.0 [110/2] via 10.138.43.1, 00:00:09, FastEthernet0/0 B. o IA 9.152.105.122 [110/3] via 10.138.43.1, 00:00:09, FastEthernet0/0 C. o IA 10.138.0.0 [110/3] via 10.138.43.1, 00:00:09, FastEthernet0/0 D. o IA 10.249.0.0 [110/2] via 10.138.43.1, 00:00:09, FastEthernet0/0 E. o IA 4.249.113.59 [110/2] via 10.138.43.1, 00:00:09, FastEthernet0/0 F. o 8.187.175.82 [110/3] via 10.138.43.1, 00:00:09, FastEthernet0/0 Answer: F Topic 3, EIGRP QUESTION NO: 10 Which three statements about the EIGRP routing protocol are true? (Choose three) A. EIGRP sends periodic hello packets to the multicast IP address 224.0.0.9 B. EIGRP sends periodic hello packets to the multicast IP address 224.0.0.10 C. EIGRP supports five generic packet types, including Hello, Update, Query, Reply, and ACK packets. D. EIGRP supports five generic packet types. Including hello, database description (DBD), Link-state request (LSR), link-state update (LSU), and LSAck E. EIGRP will form a neighbor relationship with another peer even when their K values are mismatched. F. EIGRP will not form a neighbor relationship with another peer when their AS number and K values, either or both are mismatched. Answer: B,C,F
Know what your next step is on the Related certification path.
Other promising certifications to advance and enhance your certification
| Guarantee | Product Description |
| Exam F.A.Q. |
| Web Demo |
| Payment & Download |
| Success Reviews |
| Related Certifications / Exams |
USA
UK
JP
KR
DE
RU
FR
TW
HK
CN
Mobile